It included the front and rear locking devices independent of one another.
#DELTA ROCKWELL TABLE SAW FENCE PARTS ON EBAY FULL#
The rip fence extended the full length of the table. These manufacturing enhancements assured a true running arbor on which the blade was mounted and held square with the axis of rotation.ĭelta Homecraft 8 Inch Table Saw No. The arbor was ground to a close tolerance and its flange was finish faced accurately after it was assembled. The use of a heavily ribbed table, side table extensions, arbor bracket, trunnions and trunnion brackets made of sturdy grey iron castings produced maximum rigidity between the working parts of the machine. The construction of the saw featured a welded steel cabinet ruggedly constructed as a frame for mounting the table and carrying the working parts to provides maximum safety for the operator. The cabinet size is 13 1/2 inches wide, 14 inches deep by 11 1/2 inches high. Its size is 15 inches wide by 22 inches deep when both side extensions are mounted, its size is 25 inches wide by 22 inches deep. The table height of the saw was 34 1/2 inches above the floor when mounted. The "Micro-Set" rip fence could be clamped at any point along the entire width of the table including the side extensions when mounted. The "Auto-Set" miter gauge was adjustable for cuts at any angle up to 60 degrees right or left. When the saw blade was tilted 45 degrees to the right, a 1 9/16" depth of cut could be obtained with an 8 inch blade. The maximum depth of cut was 1 1/4 inches. Accessories for dado and molding operations were also available to extend the versatility of the saw.
Cross cutting, ripping, mitering and beveling operations could be easily accomplished. The saw was light weight, had a large working capacity and was ruggedly designed. The working parts were enclosed in a welded steel cabinet.
34-500 performed all of the operations commonly done on larger and more expensive machines of its type.
0 kommentar(er)
